Building cable
Facia
Reader tail
Connection
Fit screw to secure facia to bezel
Bezel
Building cable
No. 6 pan head screw
No. 6 pan head screw
Installation
The reader is designed to be mounted on any solid flat surface. However, installation on metal
surfaces, particularly those with a large surface area will reduce read range. The extent to
which the range is reduced will depend upon the type of metal surface.
The recommended mounting height for the reader is 1.1 m (3.6 ft) from the floor level to the
centre of the reader. However this may vary in some countries and you should check local
regulations for variations to this height. If using conduit, the reader can be mounted on a
mounting block (C300951).
ATTENTION: This equipment contains components that can be damaged by electrostatic
discharge. Ensure both you and the equipment are earthed before beginning any servicing.