EN
So try to make sure that you place the receiver in a place where there are as few obstacles as
possible in the way.
11 Fitting the Birth Alarm onto the mare
To use the Birth Alarm Advanced in a girth or underneath the halter, it must be attached to the
holder supplied. To do this, proceed as follows:
•
Carefully slide the Birth Alarm Advanced into the holder as shown in the picture below.
•
Make sure that both status lights are visible.
•
Then close the flap with the supplied closing clip.
In the example below, the status lights are placed in the direction of the closing clip, but you
may also place the casing the other way around. This does not affect the operation.
