GalileoSky gps light, Руководство пользователя

Страница: 39 / 52

User’s Manual GalileoSky GPS Lite (0192)
GalileoSky Ltd
Page
39
Command format AccSens Sens,TO
Parameters Sens – accelerometer sensitivity.
TO – operating time after the vehicle stops, during which coordinates are
updated, [sec].
Explanation This function results in reducing reflected signal effect after the vehicle stops.
Default value is 40,300.
Sens value equal to 600 is 1g (g –gravitational acceleration)
Example
Request: AccSens 40,300
Reply: Accelerometer sensitive: sens = 40, time out=300
Command format Ignition N
Parameters N – input used as ignition sensor:
0 – ignition sensor is not used;
1 – input 0 is used as ignition sensor;
2 – Input 1 is used as ignition sensor;
Explanation At no set input triggering, vehicle is considered not started, and coordinates are
not updated. It allows avoid reflected signal effect after the vehicle stops.
Triggering on input is determined by limits set by InCfg command (see Discrete
analogue inputs settings).
Example
Request: Ignition1
Reply: IGNITION:1;
Command format Shock Mode,Angle,Timeout,ShockSens
Parameters Mode – shock determination mode:
0 – shock determination is switched off;
1 – shock determination is switched on, X axis is in vertical position;
2 – shock determination is switched on, Y axis is in vertical position;
3 – shock determination is switched on, Z axis is in vertical position;
Angle – maximum incline angle [0º-180º], value equal to 180 switches incline
determination off;
Timeout – maximum allowable time when incline angle exceeded, [sec.].
ShockSens – maximum acceleration at exceed of which shock is detected. 600
points – free fall acceleration.
Explanation Enabling shock and incline determination mode.
Example
Request: Shock 3,30,5
Reply: Shock: Mode=3,MaxAngle=30,RT=5;
Command format Mhours LoLevel,HiLevel
Parameters LoLevel – input vVpit at stopped engine, [mV];
HiLevel – input vVpit at started engine, [mV];
Explanation Allows filtering reflected signal effect after the vehicle stops.
Example
Request: mHours 12000,14500
Reply: Mclock: lolevel=12000,hilevel=14500;