Guide to Your Galileo Organ, v.1.0
9
Use the ACCEL knob to specify how fast the speakers speed up or slow down when
changing speed modes or using the brake.
Use the BALANCE knob to specify the mix between the horn and drum speakers.
Use the MIC knob to specify the stereo “travel” for the rotary effect.
Use the MIX knob to specify the amount of Doppler effect.
Delay
Use the TIME knob to specify the length of the delay. Use the FEED knob to specify
the amount of feedback. Use the MIX knob to specify the amount of wet (delayed) vs.
the dry signal.
Reverb
Use the SIZE knob to specify the size of the reverberation. Use the SPREAD knob to
set the amount of stereo spread for the reverb effect. Use the MIX knob to specify
the amount of reverberated signal. Use the PRE knob to set the amount of pre-‐delay
for the reverberated signal.
Signal Flow
You can change the order in which the effects are processed by using the drag-‐and-‐
drop interface in the Signal Flow area. To return to the original order saved in the
current preset, press the RESET button.
Pre-‐ and Post-‐FX Volume Controls
Use the ORGAN / MASTER volume toggle always accessible on the left side of
control panels to switch between Pre-‐ and Post-‐FX volume controls, respectively.
In the ORGAN position, the volume fader will control the gain of the signal going into
the FX chain from the organ.
In the MASTER position, the fader will control the amplitude of the final, post-‐FX
signal for the whole system. If digital clipping is heard, or if the clipping indicator in
the built-‐in VU meter is lit, compensate by turning down this master volume.
Содержание Organ
Страница 1: ...Guide to Your Galileo Organ Version 1 0...