
Galileo
Page 27
AUDIO
This parameter modifies the Line input volume. The default setting
is = 0 (recommended when no devices are connected).
Use the CURSOR keys to select the function and the ENCODER to
change the setting.
If you connect a CD player or any other external player to the Line
inputs, make sure that you have started up the remote device
before increasing the input volume, then gradually start to increase
the volume to the required level.
LINE IN
:
This is important to prevent peaks or distortion, to keep the complex
amplification system installed on the PIANO in good condition.
This parameter affects the microphone connection input
gain.
Before connecting the microphone to the PIANO make
sure that the analogue GAIN is at the minimum volume,
to prevent feedback.
There are two modes available:
MIC IN
:
After connecting the microphone as described above, you can gradually
increase the analogue GAIN.
Once you have set the analogue GAIN to your requirements, you can
adjust the microphone volume in the MIXER page (the mic. default
volume is 16).
NORMAL
GAIN BOOST
Recommended for low-sensitivity consumer
microphones.
Recommended for professional dynamic
microphones.
Содержание Grande II
