89
Figure 4-86 FTP
Step 2 Select the
Enable
check box to enable FTP function, and select the FTP type.
You select
FTP
or
SFPT
from the drop-down list.
SFTP
is recommended to enhance
network security.
Step 3 Configure FTP parameters. For details, see Table 4-33.
Table 4-33 Description of FTP parameters
Parameter
Description
Server Address
The IP address of the FTP server.
Port
The port number of the FTP server.
Username
The user name to log in to the FTP server.
Password
The password to log in to the FTP server.
Remote Directory The destination path in the FTP server.
Emergency
(Local)
Select
Emergency (Local)
, and when the FTP server does not work, all
the files are saved to the internal SD card.
Step 4 Click
Save
.
Step 5 Click
test
to test whether FTP function works normally.
4.7.3.4 NAS
This function can be enabled only when NAS was selected as a destination path. Enable this
function, and you can save all the files in the NAS.
Step 1 Select
Setting > Storage > Destination > NAS
.
The
NAS
interface is displayed. See Figure 4-87.
Figure 4-87 NAS
Step 2 Select the
Enable
check box to enable NAS function, and select NAS protocol type.
