Galaxy GS-105HS, Руководство по эксплуатации

Страница: 10 / 16

10
Adjusting the Pressure
7.ADJUST THE PRESSURE
PRESSURE READOUT
REMEMBER: To allow for the thickness of your garment when adjusting the pressure.
Printing and Pressing
8.PRESS
NOTE: Please be aware after time is complete, gas shocks will automatically release
the platen into the “UP” position.
7.1 First, locate the LED Display on the
Press. The Pressure Adjustment Knob
is located in the center of the heat platen
(See figure 7.1)
7.2 To adjust the Pressure, simply turn the
Pressure Adjustment Knob to the right
or clockwise to increase the Pressure
and to the left or counterclockwise to
decrease the Pressure. The readout will
display the Pressure when locked down
in the print position.
7.3 A visual Pressure Readout is located on
the lower right side of the LCD Display.
When the handle is locked into the Print
Position, a pressure number will be
displayed. Readout will be on a scale of
0 - 9.A 0 Pressure readout would
indicate no pressure at all and 9 would
indicate very heavy pressure. (See
figure 7.3)
⚫
Once your equipment has reached the designated temperature.
⚫
Position the garment and application on the lower platen.
⚫
Lower and lock the heat platen into the press position. Closing the press will
start the automatic timing process.
⚫
The timer will automatically count down and lift the heat p
laten into the “UP”
position when the press cycle is complete.
7.1