5
User Manual
Cleaning and Maintenance
1. Disconnect machine before cleaning and allow to cool.
2. Use only a damp towel with non-corrosive cleaner. Do not immerse or flush with water.
3. Wipe down outside surface to remove any soil.
4. Store in a dry clean area when not in use.
Troubleshooting
Problem
Possible Cause
Action
Grill plates do not heat even though power
indicators are lit.
Defective controller
Replace controller
Defective heater(s)
Replace heater(s)
Temperature can not be controlled.
Defective controller
Replace controller
Heating appears normal but power indicators
are not lit.
Defective indicator(s)
Replace
No action when power is turned on.
Defective fuse or open circuit
breaker
Replace fuse or reset circuit
breaker
Do not use the machine if any of the above occur.
Any troubleshooting corrections should be performed by a qualified technician.
Daily Check
Before using the machine, visually inspect for any signs of damage or frayed power cord.
Be certain machine is on a level countertop.
After turning it on, check for anything unusual before you use it.
Inspect the machine every day before using.
If there is any question about operation, do not use.
Attack tough grease, oil, and carbon with this ready to use decarbonizer
and degreaser. Its unique formula is designed to clean ovens, grills,
hoods and a wide variety of other surfaces.
