Galaxy Press GS-207M, Руководство по эксплуатации

Страница: 6 / 19

6
NOTE: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid hazard.
2.Turn On the System
3.Adjusting the Temperature
3.1 Press the Mode Select button located
in the center of the Control Panel
(fig.3.1).Press (+) and (-) button to
select different heater. (fig.3.2).
3.2 For heater 1/2 and 3/4,
press “set”
button to choose
“start temp” or
“finish temp”, press (+) and (-)button
to set temperature. For heater 5 and
6,
press “set” button to choose “start
temp
”, press (+) and (-)button to set
temperature.The temperature can be
set from 0° C (0° F) to 220° C (428°
F). (fig.3.2)
3.3 press set button again to finish
setting,move the cursor to
“next”,
ready to enter time setting page.
(fig.3.3)
⚫
Switch on the system. (fig.2.1)
3.1
3.2
3.3
2.1