User Manual
User Manual
6
Installation
Remove all packaging materials and accessories.
Examine the microwave for any potential damage. If damage is found, DO NOT install the unit and
immediately contact the manufacturer.
Remove the protective film on the microwave oven cabinet surface.
Do not remove the light brown Mica cover that is attached to the oven cavity to protect the
magnetron component.
1. Select a level surface that provides enough space for the intake and outlet vents. See below
for clearance details.
A minimum clearance of 3.0 inches (7.5cm) is required between the microwave and any adjacent
walls. The unit cannot be fully enclosed, one side must be open.
•
Leave a minimum clearance of 12 inches (30cm) above the oven.
•
Do not remove the legs from the bottom of the oven.
•
Blocking the intake and/or outlet openings can damage the oven.
2. Plug your oven into a standard 120V~ outlet. Confirm your outlets are wired as 120V~ before
plugging in.
WARNING: DO NOT INSTALL OVEN OVER RANGE COOKTOP OR
OTHER HEAT-PRODUCING APPLIANCE. IF INSTALLED NEAR OR
OVER A HEAT SOURCE, THE OVEN COULD BE DAMAGED AND
THE WARRANTY WOULD BE VOID.
3.0 inch(7.5cm)
3.0 inch(7.5cm)
12 inch(30cm)
OPEN
Operation
1. Power Level
2. Clock Setting
3. Kitchen Timer
11 power levels are available.
Level
Power
Display
10
100%
PL10
9
90%
PL9
8
80%
PL8
7
70%
PL7
6
60%
PL6
5
50%
PL5
4
40%
PL4
3
30%
PL3
2
20%
PL2
1
10%
PL1
0
0%
PL0
(1) Press "CLOCK" once, "00:00" will display.
(2) Press the number keys and enter the current time. For example
, if it
is 12:10, press "1, 2, 1, 0"
consecutively
.
(3) Press "CLOCK"
again
to fin
alize the
clock setting.
(4) If the numbers entered are not within the range of 1:00--12:59, the
setting will be invalid until valid numbers are entered.
Note: (1) In the process of clock setting, if the " STOP/CANCEL " button
is pressed or if there is no operation within 1 minute, the oven will
automatically go back to the former setting.
(2) If the clock needs to be reset, please repeat steps 1 to 3.
(1) Press "KITCHEN TIMER" once, the screen will display 00:00.
(2) Press the number keys and enter the
desired time
.
(3) Press "START/+30SEC" to confirm setting.
(4) When the timer
is up
, the buzzer will ring 5 times.
If the clock has been set, the screen will
then
display
the current time.
Note: While using the kitchen timer, no other programs can be set.
