635/600 Daughter Board Flashing QRS
P a g e 2 of 2
PART
4
-
UPLOADING
THE
TARGET
S28
FLASH
FILE
Once you flash the first board, you can flash the next board without having to reload the
target flash file
.
9.
Go to the
Factory Function page
to begin the uploading process …
10.
Click the
Browse button
and navigate to the appropriate Folder Path and select your target
S28 file
.
•
USB path X:\\Auxiliary\System Galaxy\FTS635\Factory Testing\S28\
your_model
*
\
your_board-type
*
\ Previous Version …\
•
PC path C:\\GCS\System Galaxy\FTS635\Factory Testing\S28\
your_model
*
\
your_board-type
*
\ Previous Version …\
Take care to open the correct folders for
your board-model
(i.e. 600 or 635) and
board-type
(DRM/DPI, DIO, DSI).
11.
Select the correct
S28 File
that matches your
Target Flash Version
and
click the
Open button
.
12.
You must click the
Upload button
in the
Factory Function page
to load the S28 File to the FTS-CPU memory bank.
(
Live upload results will display in the Activity Log section of the web page
. )
13.
Click
OK button
when the upload is completed. Your
Target Flash Version
will display in the
Uploaded Column
.
14.
PART 5 - FLASHING THE DAUGHTER BOARD.
DO NOT RESET THE CPU BOARD.
Doing so will delete the
target flash file
you just uploaded.
PART
5
-
FLASHING
THE
DAUGHTER
BOARD
15.
Click the
Flash Version link
that is shown beside the
board
type
you want to flash - (i.e. 600 or 635 DRM/DPI, DIO, DSI, etc.).
16.
When prompted,
enter the 8-digit serial number
of the target Daughter Board as shown in the example below:
NOTE: The Serial Number must be exactly 8 digits.
The serial number is on the printed label that is affixed to the board.
When typing the serial number, you must swap the first zero into the leading position
– see examples below.
Examples of Serial Number Entry
Model
IF BOARD LABEL SAYS THIS
YOU WILL ENTER THIS INTO THE FTS SERIAL NUMBER PROMPT
635 DRM
“3
0
012 …”
“
0
3012 …”
notice how the
first zero
has been moved from
the second position into the leading position.
600 DPI
“2
0
012 …”
“
0
2012 …”
DO NOT DUPLICATE SERIAL NUMBERS
.
Boards will not function with duplicate Serial Numbers or Board_IDs
17.
Click the
OK button
to begin transferring flash to your target Daughter board.
The Activity Log displays progress indicators that show the
board flash progress
and
flash verification progress
.
NOTE:
If the Factory Test Station stops the flashing:
make sure you clicked the correct
Flash Version Link
that is beside
your
board-type
and
board-model
. The Factory Test Station will not transfer flash if the selected link is for a board that
is different than the actual board you are attached to. Also, you can verify that you have uploaded the correct
S28
Flash file
. And that the
FTS Ribbon cable
is securely attached to the CPU and your Daughter Board
18.
When the
Activity Log
displays “
flashing is successful
”, you will click the
OK button
.
19.
Press the
Reset button
(SW1) on the Daughter Board after flashing is successful, to complete the process. Do not reset the
CPU or you will have to reload your target flash file (that was loaded in Part 4).
20.
Disconnect the
Factory Test Cable
from the finished Daughter Board.
See the
or
635 Hardware Installation Guide
for instructions on installing the board, as needed.
21.
Connect the
Factory FTS Cable
to the NEXT Daughter Board at the Factory Test port.
22.
To flash your next Daughter Board you will return to
PART 5 - FLASHING THE DAUGHTER BOARD.