3
JIB/BTSR Receiver Features and Functions
JIB/BTSR Stereo Bluetooth Receiver
Receiver Features:
Front Panel
G)
Back Panel
0
G) -
2.4 GHz Antenna Connector
® -
Euro-block Connector
@ -
Status LED
@ -
Bluetooth® Pairing Button
Receiver Functions:
®
®
® 0
® -
Volume Control
@-
SV DC/1A Power Input
(j)
-
UR XLR Balance Output
@-
UR 1/4" Balance Output
1. ANT: Connect the included removable 2.4 GHz antenna. The antenna receives and transmits the Bluetooth® signal from a
paired Bluetooth® device. The JIB/BTBR has a range of up to 10 meters under optimal conditions.
2. Euro-block Connector: For remote pairing, use 2 connector cable to connect this connector to a momentary switch. Press
the switch to erase the linking between two paired Bluetooth® devices, then make the JIB/BTBR
available for pairing to another nearby Bluetooth® device.
3. STATUS: LED indicates the JIB/BTBR Bluetooth@ pairing status:
Alternating between red and green means the JIB/BTBR is not paired to a Bluetooth® device.
Flashing only a green light means the JIB/BTBR is paired to a Bluetooth® device.
4. PAIR Button: With both the receiver and the Bluetooth® enabled device powered on, press "PAIR". The receiver will
remember the previously connected device for the next use. You can play audio from that same device immediately.
To disconnect, press the "PAIR" button.
5. VOLUME Control: Turn this knob to adjust the output volume level.
6. SV DC/1A Power Input: Use the included power adapter to connect this input to a power outlet.
7. UR XLR BALANCE OUT: Use XLR cables to connect these outputs to your loudspeakers, mixer, etc.
8. L/R 1/4" BALANCE OUT: Use 1/4" cables to connect these outputs to your loudspeakers, mixer, etc.
Содержание JACKS in the BOX JIB/BT8R
Страница 1: ......