3. Tighten those four screws, please
that one of the screws should have a plum blossom
washer to keep a good
4.2 THE
To disassemble,
out the power
2. Take
the cabinet.
3. Loosen the
six
screws of
hinge (up)
with a socket wrench (FIG.4 - 2).
4. Push the door release button to have the hook out
(FIG.4 -3).
5.
the hinge with the door out of the oven
together, and take off the washer of the hinge (Iow)
(FIG.4 - 2).
6. Pick up the ten inverse hooks which around the
cover with a smali screwdriver
carefully(ATTENTION: the cover is
of
plastics, and is
liable to be broken), and take
out the cover.
7. Take off the two screws at the door side
with a
8. Take off the hinge (up)(FIG.4- 2).
9.
the
the doorplate
10. Take off the hook spring with a pointed
then the hook combination.
the window piąte with hand, push it
down according to the arrow
and take it off.
screw
oven
Fig.
4-2
l
hol der
swtch
atch swtch
der
atch swtch
ot swtch
(b)
To assemble the door combination(see sketch
4-5) Fig. 4-3
1.
proper silicon grease or lubricating
grease on the
of the hook
then fix the hook on the oven door, and the spring on its place
(FIG.4 - 5), check whether the hook is operating in normal.
2. Apply proper silicon grease or lubricating grease on the
mark of the hinge (UP), install the hinge (UP) in
the hole at right above of the door as FIG.4 - then install the window on the door as FIG.4
the hook won't out. Then tighten each hook on the window to the trough of the door.
assembled, check
whether the door hook is working in normal.
Fig. 4-4
Fig. 4-5
10
