
10
Learn about your microwave oven.
CAUTION
To avoid risk of personal injury or property damage, do not operation the microwave oven
empty.
To avoid risk of personal injury or property damage, do not use stoneware, aluminum foil,
metal utensils, or mental trimmed utensils in the microwave oven.
Setting the Clock
This is a 12 or 24 hour clock. In standby mode, press
Clock
pad once to choose 12 hour clock and if
you want to choose 24 hour clock, press
Clock
pad again
Example: Suppose you want to set the clock for 8:08 am.
1.
In standby mode, press
Clock
pad once or twice.
2.
Press number pads
8, 0
and
8,
the display will show "08:08".
3.
Press
Start/Add 30 Sec
to confirm
Microwave cooking
1.
In standby mode, press
Time Cook
pad once.
2.
Use the number pads to enter cooking time. The longest time is 99 minutes and 59 seconds.
3.
Press
Power Level
pad once, and then use the number pads to enter power level.
4.
Press
Start/Add 30 Sec
pad to confirm.
BASIC CONTROLS
Function description:
➢
When the oven first plugged in, the display will show "12:00" and ":" flashing.
➢
When cooking setting is interrupted for 1 minute, the system will back to the standby mode
automatically.
➢
During cooking, if press
Stop/Cancel
pad once or open the door, the program will be paused,
close the door, then press
Start/Add 30 Sec
pad to resume, but if press
Stop/Cancel
pad
twice, the program will be canceled.
➢
After ending cooking, "END" will display and the system will sound beeps to remind user every
two minutes until user press
Stop/Cancel
pad or open the door.
➢
SIGNALS DURING OVEN SETTINGS
ONE SIGNAL:
Oven accepts the entry.
TWO SIGNALS:
Oven does not accept the entry, please check and try again
.
NOTE:
During cooking, you can press
Clock
pad to check the clock.
"00:00" will display and two beeps will sound to remind user to re-enter the time, if you
enter time is beyond the scope of clock when you set the clock.