ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
During cooking program, press START/STOP or open the door once to pause the program, then press
START/STOP to resume. Press RESET once to cancel the program.
End will display with beeps to remind the program is over, and it will sound every minute until you press any
pad or open the door.
SETTING THE CLOCK
1.
In waiting mode, touch CLOCK pad once or twice.
2.
Use the number pads to enter the correct time.
3.
Touch CLOCK pad again.
NOTE: This is a 12-hour cycle or 24-hour clock. During setting mode, press RESET to cancel the present
clock time. Press CLOCK to check the present clock time.
SETTING A COOKING PROGRAM
A. One-stage Cooking
1.
In waiting mode, place food into oven and close it.
2.
Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes
and 99 seconds.
3.
If you want to set a power level other than 100% power, touch POWER, then use the number pads to
enter the power level.
Number pad
Cooking power
1
ǃ
0
100%
9
90%
8
80%
7
70%
6
60%
5
50%
4
40%
3
30%
2
20%
1
10%
0
0%
4.
Touch START/STOP to start cooking.
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
1.
SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”. DO NOT TOUCH START/STOP
10
OPERATION INSTRUCTIONS
