14
S
PLATTER SHIELD EXHAUST WINDOW FRAME CLEANING
1.
Detaching:
Hold the two tabs in front of the splatter shield with your hands (as shown by the
arrows).Push the tabs following the direction of the arrows and pull downwards after you have pulled
in the tabs.
2. Wash the splatter shield exhaust window frame, rinse, sanitize, allow to dry.
3.
Installation:
1)
Put the the exhaust window frame into the cavity.
2)
Insert the two locating pins at the rear of the exhaust window frame into the locating holes on
the rear panel of the cavity.
3)
Push the front of the exhaust window frame upward and push the lugs at the left and right sides
into the fixing holes at the left and right sides of the cavity.
F
AILURE DIAGNOSE
Failures
Possible reasons
An error sign “E-01” display.
VPC1 frequency conversion failure.
An error sign “E-02” display.
VPC2 frequency conversion failure.
An error sign “E-03” display.
Communication failure.
An error sign “E-05” display.
VPC1 temperature sensor open circuit alarm.
An error sign “E-06” display.
VPC1 temperature sensor short circuit alarm.
An error sign “E-07” display.
VPC2 temperature sensor open circuit alarm.
An er
ror sign “E-08” display.
VPC2 temperature sensor short circuit alarm.
An error sign “E-09” display.
Cavity temperature sensor open circuit alarm.
An error sign “E-10” display.
Cavity temperature sensor high temperature alarm.
An error sign “E-11” display.
Cavity temperature sensor short circuit alarm.
An error sign “FOOD” display.
No load high temperature alarm.
An error sign “FAIL” display.
Button closed alarm.
