20
Agitate and scrub with a brush to remove embedded dirt.
Rinse thoroughly and shake dry.
Replace by fitting the filter back into the opening.
Light
To replace LED, first disconnect power to the oven at the circuit breaker panel or by unplugging.
To release cover, remove the screw on the light cover. (See illustration.)
To release LED, remove the screw on the LED. (See illustration.)
Special LED is needed.
Close light cover and secure with screw removed in step 2.
CAUTION: Light cover may become very hot. Do not touch glass when light is on.
·
Charcoal Filter
Charcoal filter is used for nonvented, recirculated installation. The filter should be changed every 6 to
12 months depending on use.
Disconnect power to the oven at the circuit breaker panel or by unplugging.
Remove the Grease Filter from the bottom of microware.(See illustration.)
Change the charcoal filter.
