22
Exterior
The outside surface is precoated steel and plas
tic.
Clean the outside with mild soap and water; rinse
and dry with a so
ft
clot
h.
Do not use any type of household or abrasive cleaner
.
Door
Wipe the window on both sides with a damp cloth to remove any spills or spa
tt
ers
.
Metal parts will be
easier to maintain if wiped frequently with a damp clot
h.
Avoid the use of spray and other harsh
cleaners as they may stain, streak or dull the door surface
.
Touch Control Panel
Care should be taken in cleaning the touch control pane
l.
If the control panel becomes soiled, open the
oven door before cleaning
.
Wipe the panel with a cloth dampened slightly with water only
.
Dry with a
so
ft
clot
h.
Do not scrub or use any sort of chemical cleaners
.
Close door and touch STOP/CAN
CEL.
Interior
Cleaning is easy because li
tt
le heat is generated to the interior surfaces; therefore, there is no baking
and se
ttin
g of spills or spa
tt
ering
.
To clean the interior surfaces, wipe with a so
ft
cloth and warm water
.
DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS
.
For heavier soil, use baking soda or
a mild soap; rinse thoroughly with hot water
.
Waveguide Cover
The waveguide cover is located on the ceiling in the oven cavity
.
It is made from mica so requires
special care
.
Keep the waveguide cover clean to assure good oven performance
.
Carefully wipe with a
damp cloth any food spa
tt
ers from the surface of the cover immediately a
ft
er they occur
.
Built-up
splashes may overheat and cause smoke or possibly catch
fi
re
.
DO NOT REMOVE THE WAVEGUIDE
COVER
.
Fan
The fan will automa
ticall
y start when heat rises from range surface units or burners
.
This protects the
microwave oven from excessive temperature rise
.
The fan will stay on un
til
the temperature decrease
.
It cannot be turned o
ff
manually during this
ti
me
.
For other uses, select either HI or LO speed
.
CLEAR AND CARE
