Galanz BIOUK003B, Руководство пользователя

Страница: 13 / 28

BIOUK003B
12

Take care of escaping steam when opening the oven door during
cooking or at the end of the cooking cycle.

Save electricity mode:
After 1 minute of in-operation the display will show the
power-saving mode and the oven will go into standby. Turn any
button or press any pad once to end.

The Knob position setting should always be returned to " ● ". The
knob can be pushed flush for protection by gently press down on
the knob. When you need to use, gently press the knob to engage
the pop up function.

The oven control panel is touch screen and only requires a light
touch to activate the corresponding operation. Do not press hard
or wear gloves.

When the oven is plugged in, turn either of the function knobs or
“-/+” knob and the indicator light corresponding to the knob will
be lit. After 1 minute of in-operation the knob indicator light
turns off.
SETTING THE CLOCK
This is a 24 hour clock. To set the clock, for example, to 9:30:
1.
Turn left function knob to “ ● ”.
2. Press “” once, the hour figures will flash.
3. Turn the “-/+” knob to enter “9” hours.
4. Press “ ” once, the minute figures will flash.
5. Turn“-/+” knob to enter “30” minutes.
6. Press “ ” to confirm.
PRESET FUNCTION
This function starts the oven and ends the programme automatically
at the specified time set in advance.
Example: Current time is 12:30, to set the “Back Convection”