5
UNPACKING INSTRUCTIONS
Unpacking and Examining Your Oven
Carefully remove oven from carton.
SAVE THE CARTON AS IT MAY
MAKE INSTALLATION EASIER.
Remove:
1.
All packing materials from inside
the oven cavity; however, DO NOT
REMOVE THE WAVEGUIDE
COVER, which is located on the
ceiling in the oven cavity. Check to
see that there are Installation
Instructions, Wall Template, Top
Cabinet Template, bag of
Installation Hardware, Charcoal
Filter and Exhaust Damper
Assembly. Read enclosures and
SAVE the Owner’s Instructions.
2.
The feature sticker from the outside
of the door, if there is one.
Check the oven for any damage, such
as misaligned or bent door, damaged
door seals and sealing surfaces, broken
or loose door hinges and latches and
dents inside the cavity or on the door. If
there is any damage, do not operate the
oven and contact your dealer.
See Installation Instruction for more
details.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In
the event of an electrical short circuit,
grounding reduces the risk of electric
shock by providing an escape wire for
the electric current. This appliance is
equipped with a cord having a
grounding wire with a grounding plug.
The plug must be plugged into an
outlet that is properly installed and
grounded.
WARNING
--- Improper use of the
grounding plug can result in a risk of
electric shock.
Consult a qualified electrician or
serviceman
if
the
grounding
instructions
are
not
completely
understood or if doubt exists as to
whether the appliance is properly
grounded, and if it is necessary to use
an extension cord, use only a 3-wire
extension cord that has a 3-blade
grounding plug, and a 3-slot receptacle
that will accept the plug on the
appliance. The marked rating of the
extension cord shall be equal to or
greater than the electrical rating of the
appliance.
ELECTRICAL REQUIREMENTS
The electrical requirements are a 120
volt 60 Hz, AC only, 20 amp. It is
recommended that a separate circuit
serving only the oven be provided. The
oven is equipped with a 3-prong
grounding plug. It must be plugged into
a wall receptacle that is properly
installed and grounded.
Power Supply Cord
1. A short power supply cord is
provided to reduce the risks resulting
from becoming entangled in or tripping
over a longer cord.
2. Longer cord sets or extension cords
are available and may be used if care is
exercised in their use.
3. If long cord or extension cord is
used
：
a) The marked electrical rating of the
cord set or extension cord should be at
least as great as the electrical rating of
the appliance.