D-20C / D-20C (V-I)
11
-
CHAPTER 2. TRANSPORT AND INSTALLATION.
Knocks and sudden movements must be avoided when transporting the equipment. The transport position
will be shown by arrows on the packaging. In any case, the packaging must be protected from water.
2.1. ELECTRICAL SUPPLY INSTALLATION.
The electrical installation of the equipment making up the system must be carried out by specialised
personnel according to the standards in force.
The location must meet the following requirements:
Place: Dry and ventilated, far enough away from the welding area in order to prevent the metal dust
caused by the welding process from getting into the equipment. The equipment must not be used in the rain.
The electrical connection of the wire-feed unit is carried out with an extension, which connects it to the
GALA INDUSTRIAL power source. The different recommended possibilities are defined in table 2.
TABLE 2. Recommended Extension Cords and Welding Torch.
WIRE-FEED UNITS
Ref. 623.00.000
Ref. 623.81.000
D-20 C
D-20 C (V-I)
Cable 50 mm
2
(5 mt)
Ref. 638.00.000
Cable 50 mm
2
(5 mt)
Ref. 638.87.000
Cable 50 mm
2
(10 mt)
Ref. 638.81.000
Cable 50 mm
2
(10 mt)
Ref.
EXTENSION CORDS
Cable 70 mm
2
(20 mt)
Ref. 638.82.000
Cable 70 mm
2
(50 mt)
Ref. 638.88.000
The general installation process is described in the GALA INDUSTRIAL power source manual. Read this
section carefully.
GENERAL GUARANTEE CONDITIONS:
GALA GAR guarantees correct operation against all manufacturing defects of the GAR WIRE-FEED UNIT
D-20 C products, as from the purchase date (guarantee period) of:
•
12 MONTHS
This guarantee will not be applied to components with a working life that is less than the guarantee
period, such as spares and consumables in general.
In addition, the guarantee does not include the installation, start-up, cleaning or replacement of filters,
fuses and cooling or oil refills.
If the product should present any defect during the guarantee period, GALA GAR undertakes to repair it
without any additional charge, unless the damage caused to the product is the result of accidents, improper
use, negligence, inappropriate accessories, unauthorized servicing or modifications to product not carried
out by GALA GAR.
The decision to repair or replace parts or supply a new appliance will depend on the criterion of GALA
GAR. All replaced parts and products will be the property of GALA GAR.
In order for the guarantee to become effective the product and the purchase invoice must be handed
over, duly completed and stamped by an authorized Technical Service. Shipping and transport expenses
will be on the user’s account.
Damage or unforeseen or indirect expenses resulting from an incorrect use will not be the responsibility
of GALA GAR.
