Doc. No.: MOVFR Hand Swap.doc
G.A.L. Manufacturing Corporation
50 East 153
rd
Street, Bronx, N.Y. 10451
Phone (718) 292-9000 Fax (718) 292-2034 10/5/2005
4
7. Disconnect motor wires and gate switch wires. Remove electrical conduits on both sides of box. Note: During
reassembly in the opposite hand, wiring and conduits are to be attached on opposite sides of box. Also reverse
any two motor wires to obtain proper rotation of motor.
8. Remove 4 bolts holding motor to motor mounting base. Then remove 2 bolts securing the mounting base.
9. Remove 4 bolts holding drive arm support assembly to the base. Note: During reassembly in the opposite
hand, you must remove the 3 bolts on the support assembly and shift to top half of the support over to the next
set of holes. (if applicable)