Gaither GT4532, Инструкция по эксплуатации

Страница: 2 / 26

Please read the warnings and instructions carefully in the present manual since they are concerning the
important indications and safety of operation and maintenance. The Manufacturer is in no way responsible
for eventual damages to persons, animals or equipments caused by improper, erroneous, incorrect and
unreasonable application.
Usage notice.
1. Please read the operator’s instruction manual before using this equipment.
2. Instruction book must be read carefully when using air hydraulic Jack.
3. The manufacturer reserves the rights to improve equipment without giving prior notice to buyer in
advance.
4. The operator shall read and operate the Jack according to the manual, paying special attention to the
safety warnings. Bodily inquiry or death may occur if the safety warnings are ignored.
5. Please do not damage or disassemble the safety valve.
6. please place the air hydraulic Jack in the middle of heavy loading object when using.
7. During and after lifting the vehicle, make sure to properly position jack stands (supports).
8. Please make sure there is plenty of room to operate the Jack according to the manual.
9. When lifting or lowering, please check and make sure no body is under the heavy loading object.
10. When lowering, the operation rod must be kept in the lowest position to avoid damages.
Application:
Air hydraulic jack is a newly-type lifting equipment. It utilizes compressed air to promote booster
cylinder, to make the hydraulic oil which is stored in oil tank infuse into oil cylinder to move hydraulic
cylinder up & down. It adopts the machinery design combination of hydraulic pressure with great advantages
of delicate design, small dimension, convenient moving, wide scope of usage, strong jacking capacity and
low lifting part. It is a convenient lifting equipment and low labor intensity of automobile manufacturing,
repairing, engineering mechanism or heavy-facility.
Specification & Parameter.
Model No. GT-4532
Jacking Capacity 45t/20t
Air Pressure 8-12 bar
Lowest Height 150mm
Hoisting Height 130mm
Weight 46 kg
1