©
2020 Mindmaze SA & Gait Up SA. All Rights Reserved. MindMaze, Gait Up, Gait Up GO the Mindmaze LOGO, the Gait Up LOGO and Physilog are trademarks or registered
trademarks of Mindmaze Holding SA.
Getting started
As with any prescription medical device, failure to follow product instructions or adjust settings and
performing therapy applications without express direction and/or supervision of your trained medical
professional may lead to improper product performance and the potential for serious or fatal injury.
Do not use this medical device in close proximity or in combination with life supporting medical devices,
high risk medical devices and/or defibrillators.
Charge
Physilog®
6 device with the provided
USB-C cable.
Plug one end of the included USB-C to USB-A
charging cable into the USB-C connector on
the Physilog6 and the other end into a
computer, or into the USB-A connector of a
mobile phone charger.
Light Indicators on the Physilog6 device
related to device charging:
1
Charging
Charged
2
Open the Gait Up GO Mobile
Application
To start an assessment with Gait Up GO
medical device, open the Gait Up GO
mobile application installed in the
Mobile Phone/Tablet given to you by
your Medical Professional.
3
Make sure that the Physilog
®
6 device and
the Gait Up GO Mobile Application are
connected.
By checking the icon on the top right corner
in the welcome screen of the app. If you
have any connection problem, please
contact your healthcare professional.
Performing the clinical assessments
programmed for you by your
medical professional.
Click on the one of the tests appearing
in the list
“Your
tests
today”
.
4
5
Follow the test instructions appearing on
the screen to place the sensor device on the
body. When you are ready, click
“Go”
.
Once you finish the test, click
“End”
.
Click
“Save”
in order to save the test
results that will be analyzed by your
medical professional.
6
