GS1011MIPS
User Manual
Sheet of 11
Mar. 27, 2012
Proprietary Information and Specifications are Subject to Change
2
This document describes a simple method for characterizing GS1011MIPS WLAN module based
RF parameters, such as transmitted spectra and receiver sensitivity. It will be described step by step
below that how to control and setup.
Step 1 : Extract to CDM20814_WHQL_Certified.zip, it is a USB to UART driver, then setup it.
Step 2 : Setup
teraterm_utf8-4.58.exe
program, this program can help to send command to module.
Step 3 : Double click UTF-8 execute file as shown below, it will occur after completing step2 install.
Figure 1
Step 4 : When implement UTF-8, selecting Serial port correctly.
Figure 2
