Set 4 Bronze Lawn Edging with Solar Lights
K244
Instructions for Use
Please read and retain these instructions for future reference
v002:17/01/22
1.
The bulbs and stakes need to be assembled first. Push the bulb into place then move onto the next
bulb. Affix total of 9 lights one after the other. Press each one down until it locks (see image). When all
bulbs are in place (36), fit the backing section and clip into place, press down to lock them. Make sure
it is clipped in place then turn the panel over and push the bulb in to place. Then move on to the next
panel.
2.
Slide the stakes into the holes
3.
Connect the panels.
Care and Maintenance Recommendations
1.
Clean solar panel with a soft sponge every couple of weeks.
2.
Make sure all connectors are still tight and no water getting in.
3.
During the winter if you can bring it inside and give a good clean ready for next year.
DISPOSAL
•
Coopers of Stortford use recyclable or recycled packaging where possible.
Clip panels together and attach part C, D
and E at one end.
Panel open with lights clipped in place.
Panel with back cover fitted.
