Gainlab Audio BISHOP, Руководство пользователя, Страница: 5 / 15

In
INPUTS AND INPUT SELECTION
You can find several different inputs on
the Bishop. Two inputs on the back, for
microphone and line signal. A combo XLR
on the front panel for connecting
microphone, line source, or instrument.
If
microphone is plugged into the front panel combo, it will
automatically disconnect the rear panel MIC input.
With
the input selection switch on the front
panel, you can choose which type of signal
you want to use the device with.
Id
INSTRUMENT DRIVE
It is possible to add extra distortion to the
instrument input. To do this, select the
instrument input on the input selector. Use
the drive potentiometer to set the desired
amount of added distortion.
Gs
GAIN SELECTOR DIAL
The gain of the Bishop can be
set on the Gain Selector Dial.
The Gain Selector Dial is
divided into two sections, a Low
and a High section. The
maximum
amplification of the Low section is
+40dB,
the maximum amplification of
the High section is +60dB. It is
possible to switch between the
High and Low sections with the
switch labeled Gain, and within
the section it is possible to
select the desired gain value
with the gain rotary switch.
LINE INPUT MIC. INPUT