GAI-Tronics PA250-001 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 12

GAI-Tronics PA250-001 Скачать руководство пользователя страница 8

Pub. 42004-340E

Model PA250-001 250 Watt Central Amplifier

Page: 8 of 12

f:\standard ioms - current release\42004 instr. manuals\42004-340e.doc

06/02

600-ohm (balanced) and Tel-Page (balanced) Input

The 600-ohm balanced input and the Tel-Page balanced input (600-ohm) connections are made via screw
terminals on the rear audio input terminal block. O/- polarity for proper signal phasing. Refer to
the Specification

section for input sensitivity levels associated with the various inputs.

600-ohm/Tel-Page Audio Input Gain Control

This rear-mounted, recessed control allows adjustment of the 600-ohm/Tel-Page input level without
affecting the level of the Hi-Z inputs. This control works in conjunction with the master

VOLUME

control located on the front panel. Both adjustments will have an effect on the output signal level from
these two input signals.

Dual Hi-Z inputs

The two

H

I

-Z

INPUTS

(10-Kohm) are RCA-type female connectors that are paralleled internally. One

connection is for signal input, the other is for strapping to a second amplifier’s input, if desired.

AUTO-MUTE for the Hi-Z Inputs

Audio signal applied to 600-ohm or Tel-Page input terminals will mute the two high impedance paralleled
inputs, unless defeated by the user. This mute feature is defeated by moving an internal jumper located
on the input PCBA, which is mounted on the back panel adjacent to the audio input terminal block
connections.

WARNING

Performing this AUTO-MUTE defeat modification requires the opening of the unit. This action should
be performed by qualified personnel only. Failure to follow instructions could result in damage to
equipment and/or injury to personnel.

Perform the following steps to move this jumper: Refer to Figure 2.

1.

Unplug the ac power cord.

2.

Remove the top cover assembly and locate the Input PCBA.

3.

Find the header marked

M

UTE

. Move shorting plug from A (enable){factory default} to B (defeat)

position.

4.

Replace the top cover.

5.

Reapply ac power.

Speaker Output Connections

The amplifier offers three different output connections to meet most system connection requirements.
Refer to Figure 4.

Direct 8-Ohm

Connect an 8-ohm speaker of proper power handling capability to the terminals marked

8-OHM

(BRIDGED).

If adding more than one speaker, the resultant speaker line impedance should equal 8

ohms. O/- polarity for proper signal phasing.

Note

: This output is a BRIDGED output. DO NOT ground either of these terminals.

«
...
6
7
8
9
10
...
»

Содержание PA250-001













Отзывы:

Нет отзывов