background image

 

 5 

02/12 

Description 

 

Physical Description 

The ILD1000A is an extended local control desk set.  Up to 

ten

 desk sets can be connected in parallel, 

allowing up to ten dispatch points for one radio system.  The ILD1000A operation can be customized 
using DIP switches 1, 2, and 3.  Refer to the switch settings table later in this section for more 
information. 

Desk Set Button Panel 

Refer to the figure below for the locations of the buttons and LEDs on the desk set button panel. 

Volume Buttons 

The desk set includes two buttons imprinted with 
up and down arrows and labeled 

VOLUME.

  

T

hey 

are used to increase and decrease the local 
speaker volume and as programming function 
keys. 

CTL (Control) Button 

The 

CTL

 button is used in conjunction with the 

VOLUME

 Up or 

VOLUME

 Down buttons to 

control the local speaker. 

IC (Intercom) Button 

The 

IC

 button allows communication between 

desk set users without transmission over the 
radio. 

Monitor Button 

The 

MONITOR

 button is used to place the radio 

in the monitor mode. 

Transmit Button and LED 

The 

TRANSMIT

 button is used to initiate voice transmissions.  Pressing the 

TRANSMIT

 button places the 

desk set in the transmit mode.   The 

TRANSMIT

 LED illuminates when transmitting. 

Internal Microphone 

This microphone is intended for use in low noise environments.  The handset must be on-hook in order to 
use the microphone. 

GAI-TRONICS

VOLUME

TRANSMIT

MONITOR

CTL        IC

ILD1000

 

Figure 1.  Front View of the ILD1000A 

Desk Set Button Panel 

Содержание ILD1000A

































Отзывы: