A
R O
MA ST
RENGTH
- AROMA STRENGTH button = OK button: you can press this button to
select, confirm or stop a function.
STEAM
- STEAM button = UP button: press this button to scroll up through the
display menu
MENU
- MENU button = DOWN button: press this button to scroll down through
the display menu.
First installation
1
Slide the drip tray with drip tray cover into the machine.
2
Remove the water tank.
3
Fill the water tank to the MAX level with fresh water.
4
Fill the coffee bean hopper with coffee beans.
5
Insert the small plug into the socket located on the back of the machine.
Insert the mains plug into the wall socket.
6
Attach the classic milk frother to the hot water/steam dispensing spout.
7
Place a container under the classic milk frother.
8
Press the STANDBY button to switch on the machine.
9
Press the OK button to start the automatic circuit priming cycle.
10
The display shows the following icon to indicate that the machine is
heating up.
- The machine performs an automatic rinsing cycle.
8
English
