17
English
6 Make sure the locking hook of the brew group is in the correct
position. To position the hook correctly, push it upwards until it
is in uppermost position.
7
The hook is not correctly positioned if it is still in bottommost
position.
8 Slide the brew group back into the machine along the guiding
rails on the sides until it clicks into position. Then place the
coffee residues drawer back in the machine.
Lubrication
Lubricate the brew group after approximately 500 cups of coffee or
once a month.
1
Apply some lubricant around the shaft in the bottom of the
brewing unit.
2 Apply lubricant to the rails on both sides, as shown in the
illustration.
3 Slide the brew group back into the machine along the guiding
rails on the sides until it clicks into position. Then place the
coffee residues drawer back in the machine.
4219_460_3729_1_booklet_A5_v1.indd 17
14/02/17 08:58