Gaggia Velasca Black Скачать руководство пользователя страница 26

Страница: 26 / 36

PERFORMANCE

The espresso

machine’s coffee is lukewarm

If your coffee is not warm enough, read along for some tips and tricks on reaching a higher temperature for your coffee..

Change temperature settings in the machine menu/settings (optional)
Enter the Menu and select temperature and adjust the setting to High/Max

Did you add milk or warm milk frothed milk?

Adding cold milk or warm frothed milk to a coffee, in both cases the temperature will decrease to some extent. This is normal
behavior.

Did you pre-heat the cups?

Pre-heat the cups with warm water or use a cup heater. Temperature will decrease when brewing coffee in cold cups.

Are you using thick walled cups or a mug?

Use thin walled cups. Thick walled cups absorb heat of the coffee which lowers the in-cup coffee temperature.

Did the temperature dropped over time?

Descale the machine with the Philips/Saeco decalcifier as the internal circuits might be clogged up with scale.

If all above solutions do not work

Please contact the Consumer Care in your country as the machine needs service.

Содержание Velasca Black





































Результаты поиска

Содержание Velasca Black

Отзывы:

Похожие инструкции для Velasca Black

Бренды по названию

Популярные бренды

Gaggia Velasca Black, Руководство по устранению неисправностей

Результаты поиска

Содержание Velasca Black

Отзывы:

Похожие инструкции для Velasca Black

Бренды по названию

Популярные бренды