Gaggia STIRO PROFESSIONAL, Руководство пользователя

Страница: 12 / 26

10
ENGLISH
HELPFUL HINTS
• The use of demineralized water is
recommended.
• When first used, the iron may emit
impure fumes or steam; this is due to
the evaporation of substances in the
component materials. We recom-
mend that you leave the iron and
steam generator on the highest tem-
perature for several minutes and
then aim the steam jet at a clean rag
before beginning to iron your
clothes.
• Ironing quality may be optimized by
varying the amount of vapor output
depending on the type of fabric to
be ironed by turning the steam con-
trol knob (
11 ). Steam is produced by
pressing the steam button.
• The ironing surface must be heat-
resistant and steam-permeable.
• Use the iron on a perfectly flat and
level surface.
OPERTATING
INSTRUCTIONS
FILLING THE WATER TANK
• Pull up the tank cap ( 9 ) (Fig. 1) and
fill the tank with water making sure it
does not overflow.
• Replace the cap.
• Plug the power cord ( 14 ) into a
grounded electrical outlet of proper
voltage.
• Turn the switch ( 10 ) to position 2
(power to steam gen iron).
The power-on indicator (
7 ) will light
up.
IRONING
Steam ironing
• Turn the iron temperature knob ( 6 )
to the steam zone (see symbol, Fig.
2). At this temperature you can
steam iron any type of fabric.
• When the steam pressure light ( 12 )
comes on the iron is ready for use.
Before beginning to iron, press the
steam button (
1 ) to expel any air from
the boiler and steam line. Some water
droplets may be ejected in this initial
phase. We recommend that you aim
the jet initially at a cloth.
After a few moments the steam indi-
cator light (
12 ) will come on again and
you may begin ironing.
During use the steam indicator light
(
12 ) will go on and off automatically as
steam is consumed. Continue ironing
normally.
• To obtain steam from the shoe,
press the steam button ( 1 ). If you
want continuous steam from the
shoe, hold the button down and
slide back the continuous shoe
steam lock (
2 ).
• To obtain steam from the toe holes
( 5 ), press the steam button ( 3 ). If you
want continuous steam from the
toe, hold the button down and slide
back the continuous toe steam lock
(
4 ).
To obtain steam from the shoe and
from the toe simultaneously, press the
buttons (
1 ) and ( 3 ) (see Fig. 3). To have
continuous emission, hold the buttons
down and slide back the two continu-
ous steam locks (
2 ) and ( 4 ).