Gaggia PLATINUM VOGUE Скачать руководство пользователя страница 4

Страница: 4 / 59

1.1

Documentation required

The following technical documentation is required for repairs:

Instruction booklet for speciﬁc model.

Technical documentation for speciﬁc model (diagrams, exploded drawings).

1.2 Tools and equipment required

As well as the standard equipment, the tools listed below are required.

1 special screwdriver with Torx T10 tip.

1 digital thermometer with full 200°C scale.

This must be suitable for measuring in liquids and on surfaces.

1 set of pliers for Oetiker clamps.

1 pincer.

1 CC -A - Vdc tester.

1.3 Safety warnings

Before starting operations on the machine, consult the relative instruction booklet.

Observe all current standards related to the repair of domestic appliances.

Always disconnect the power plug from the mains before carrying out repairs. Simply turning

off the main switch is not sufﬁcient to prevent electrical discharge.

This domestic appliance is rated with insulation class I.

On completion of repairs, the insulation and dielectric rigidity tests must be performed.

1/2

TALEA Section 01

REV00 - August 06

Содержание PLATINUM VOGUE




























































Результаты поиска

Содержание PLATINUM VOGUE

Отзывы:

Бренды по названию

Популярные бренды

Gaggia PLATINUM VOGUE, Техническое и сервисное руководство

Результаты поиска

Содержание PLATINUM VOGUE

Отзывы:

Бренды по названию

Популярные бренды