15
OPERATING THE MILK ISLAND
Warning: Before using the Milk Island, clean the milk jug and all components. Ensure that all
the components have been installed properly. The glass of the milk jug can reach very high
temperatures: danger of scalding! Only use the Milk Island with milk or water. DO NOT USE any other
liquid (other than milk or water) or chemical compound in the Milk Island.
Important note: The milk in the jug should never be below the “MIN” minimum level nor exceed
the “MAX” maximum level. After using the Milk Island thoroughly clean all the components.
To guarantee better results when preparing cappuccino, we recommend using cold (0-8°C / 32-
46°F), partially skimmed milk.
Fill the milk jug with the quantity of
milk desired (between the min and
max level).
Press and turn so as to position
the milk jug onto the base of the
Milk Island. Check that the light on
the base is green.
Once the milk is done frothing
remove milk jug using the handle.
Be sure to grip the plastic handle
as the milk jug will be hot.
After having made slight circular
movements of the jug, pour the
milk into the cup.
Position the cup with the frothed milk
under the dispensing head. Then
brew coffee into the cup. (see coffee
machine operating instructions).
OPERATING
Turn the knob until it is in the
position.
Wait for the milk to be frothed and
the desired density is reached.
Turn the knob until it is in the rest
position ( ).
Note: when the milk jug is not
being used, place the sugar
container on the base.
3
5
7
8
1
2
6
4
