Gaggia Brena, Руководство пользователя, Страница: 4 / 7

• 8 • • 8 •
15 When the “ ” and “ ” lights start
blinking, turn the selector switch clock-
wise to the “
” position; in this case,
the steam/hot water wand dispenses
the rinsing water continuously.
16 When there is no more rinsing water
left in the water tank, the “ ” , “ ”
and “ ” lights blink simultaneously.
17 Turn the selector switch to the “ ”
central position.
18 The “ ” light turns on and the water
tank must be removed before entering
the next stage.
Empty the container under the steam
wand and the one under the dispensing
spout.
19 Remove the water tank, rinse it and
fi ll it up to the “MAX” level with fresh
drinking water.
20 Place an empty container under the
steam wand and another one under
the dispensing spout.
21 When the “ ” and “ ” lights start
blinking, turn the selector switch
clockwise to the “
” position. The
second rinse cycle is started.
If the tank is not fi lled up to
the MAX level, the cycle must
be repeated from point 16.
22 When the second rinse cycle is over,
the machine enters the stand-by mode
and the “
” button starts blinking.
Empty the container under the steam
wand.
23 Turn the selector switch to the “ ”
central position.