Gaggenau WT260165, Руководство пользователя и инструкции по установке, Страница: 43 / 56

Cleaning and servicing
en
43
a
The appliance care programme
starts and a signal tone sounds.
a
After around 3 hours, the appli-
ance pauses the appliance care
programme and the remaining pro-
gramme duration flashes on the
display.
5.
Pull out the condensation con-
tainer horizontally and empty it.
6.
Pour approx. 1.5 litres of hot
mains water into the condensation
container.
7.
Carefully swivel the condensation
container horizontally and empty it
to rinse out any remaining appli-
ance care product.
Continuing the intensive
appliance care programme
1.
Pour approx. 1.5 litres of hot
mains water into the condensation
container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
2.
Insert the condensation container
so that it locks into place.
3.
Press .
a
The appliance care programme
continues.
a "End" appears on the display and
a signal tone sounds once the ap-
pliance care programme has
ended.
4.
Pull out the condensation con-
tainer horizontally and empty it.
5.
If you drain the condensation using
the drain hose, remove the stopper
from the underside of the condens-
ation container and insert it into
the recess in the top of the con-
densation container. →
Page 41
6.
Insert the condensation container
so that it locks into place.
7.
Put the appliance into standby
mode. →
Page 30
Cleaning and servicing
19 Cleaning and servi-
cing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
19.1 Water tank filter
The filter in the water tank protects
the appliance from dirt and contamin-
ants.
Cleaning the water tank filter
Check the filter regularly and clean
the filter if it is dirty.
Requirement:
The condensation con-
tainer → Page 32 is removed from
the appliance.
1.
Pull out the filter.
2.
Clean the filter under warm, run-
ning water or in the dishwasher.
3.
Fit the filter.