Gaggenau WT260110, Руководство пользователя

Страница: 36 / 68

en
operation
36
▶
Press .
a
The display shows the programme
duration or the programme end
time.
Note:
If "Cooling" appears, the ap-
pliance cools the laundry.
When "Cooling" goes out, the laun-
dry has cooled down.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
1.
Press .
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→
"Display", Page 24
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press .
12.8 Cancelling the pro-
gramme
1.
Press .
2.
Open the door.
3.
Remove the laundry.
→
"Unloading the laundry",
Page 36
12.9 Unloading the laundry
1.
Open the door.
2.
Remove the laundry from the
drum.
12.10 Switching off the appli-
ance
▶
Press .
12.11 Filter system on the
base unit
During drying, fluff from the laundry is
collected in the base unit's filter sys-
tem. The filter system protects the ap-
pliance from fluff.
Cleaning the filter system on the
base unit
If the display shows a notification
while the appliance is in operation,
clean the base unit's filter system.
Notes
¡
You can clean the filter regularly
system even without the notifica-
tion being shown on the display.
It is not necessary to clean after
each drying cycle.
¡
If you do not clean the appliance
as described, the appliance's func-
tionality may be impaired.
Requirement:
The display shows the
following during operation: "Please
clean lint filter" .
1.
Open the base unit → Page 50 .
2.
Remove the fluff.
Make sure that you remove all dirt
from the seal.