Gaggenau WS061102, Руководство пользователя и инструкции по установке

Страница: 19 / 24

Installation instructions
en
19
8.
Insert the four side stop buffers.
9. Close the appliance.
10.
Remove the retaining plate from the appliance.
11. Insert the power cable into a protective contact
socket.
The power cable must not touch the rear and base
of the appliance after installation.
Installing the furniture panel
Requirement:
Install the handle on the furniture panel
because the screws for the handle are no longer ac-
cessible following installation of the retaining plate. The
screws for the handle must be countersunk.
1.
Hold the furniture panel against the appliance, align
it and measure the lower overhang x.
X is the distance between the lower edge of the fur-
niture panel and the bottom of the fitted unit.
2.
Position the retaining plate on the rear of the fur-
niture panel and align it.
The distance between the lower edge of the retain-
ing plate and the lower edge of the furniture panel is
x + 4 mm.
3.
Use 7 screws to screw the retaining plate to the fur-
niture panel.
4.
Slide the side clips onto the retaining plate. Note the
correct direction.
5.
Attach the furniture panel to the appliance using the
retaining plate.
6.
Thread the two screws into the side threads and
screw the furniture panel into place on the appli-
ance.
Adjusting the appliance front
Adjust the appliance front upwards or downwards if ne-
cessary.