c
@c
c
ø
@
è*
*
è*
è*
è*
è*
è*
è*
è*
@
*
*
*
è*
è*
è*
*
è*
è*
@
*
è*
è*
è*
*
è*
è*
@
è*
è*
è*
*
c
ø
@c
*
è*
è*
è*
è*
è*
è*
*
@
*
è*
è*
*
*
*
*
@
è*
è*
è*
`
I
1.
2.
Do not operate the dryer if
9
Technical data
ʠ
Dimensions (DxWxH)
60 x 60 x 85 cm (height adjustable)
Weight
approximately 53 kg
Max. capacity
7 kg
Condensation container
4.0 l
Connection voltage
220-240 V
Connected load
max. 1000 W
Fuse protection
10 A
Ambient temperature
5 - 35 °C
Product number/
Production number
Inside of door
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions.
Spin speed in rpm
(residual moisture)
Drying time**
in min.
Energy
consumption**
in kWh
COTTON
7 kg
CUPBOARD DRY
*
1400 (approx. 50 %)
112
1.35
1000 (approx. 60 %)
131
1.60
800
(approx. 70 %)
150
1.86
IRON DRY
*
1400 (approx. 50 %)
80
0.96
1000 (approx. 60 %)
99
1.22
800
(approx. 70 %)
118
1.47
EASY CARE
3.5 kg
CUPBOARD DRY
*
800
(approx. 40 %)
51
0.56
600
(approx. 50 %)
63
0.70
*Test program according to DIN EN 61121
**The values may differ from the those specified depending on the type of fabric, mixture of
laundry to be dried, residual moisture in the fabric and loading capacity.
ʠ
Drum interior light (bulb E14, 15 W)
The drum is illuminated after the door is opened or closed, and also after the programme is
started. It goes out automatically. Replacing the bulb ->
Page 10
.
Optional accessories
Order no.:
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space.
This connection set must always be used to secure the dryer to the washing machine.
WAO
32000
10
What to do if ...
Repairs must only be carried out by the aftersales service or an authorised expert.
Before you contact the after-sales service, please make sure that you are unable to resolve
the problem yourself. You will be charged for advice if a technician is called out, even during
the warranty period. You can find your nearest customer services in the enclosed list. When
contacting the after-sales service, please specify the product number (E-Nr.) and production
number (FD) of your appliance (see inside of door).
ʠ
The
START/STOP
indicator
lamp does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The
ā
symbol and
START/
STOP
indicator lamp flash.
Empty the condensation container.
Clean the condensation container filter if necessary ->
Page 6
.
ʠ
The
4
symbol and
START/
STOP
indicator lamp flash.
Clean the fluff filter under running water ->
Page 4
.
ʠ
Dryer does not start.
START/STOP
button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
The required degree of
dryness was not achieved or
the drying time was too long.
Clean the fluff filter under running water ->
Page 4.
Empty condensation container ->
Page 4.
Ambient temperature higher than 35 °C -> airing.
Air inlet may be blocked -> keep unobstructed.
Was an unsuitable programme selected? ->
Page 7.
Laundry too dry? The laundry in a dryer with a heat
exchanger requires sufficient residual moisture.
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Mains failure -> Restart the dryer.
Fine layer of scale on the moisture sensors -> Clean the
moisture sensors ->
page 6
.
ʠ
Laundry damp.
Use the next drying programme up or use the timer
programme as a supplement ->
Page 7.
Warm laundry feels damper than it really is!
ʠ
The moisture content of the room
has increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked? -> keep unobstructed.
ʠ
Cln
appears in the display
panel.
Not an error! Automatic cleaning of heat exchanger.
Do not empty the condensation container.
ʠ
Mains failure.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
ʠ
The interior light is not working. Pull out the appliance plug, remove the cover cap in the
interior above the door (use Torx 20 screw driver) and
replace the bulb. Close the cover cap.
Never operate the dryer without a cover cap.
ʠ
Other intermittent noises and
vibrations.
Not an error!
Automatic cleaning of the heat exchanger.
ʠ
Loud humming noise for
several seconds.
Has the condensation container been properly reinserted?
-> slide the condensation container in fully.
ʠ
If you cannot rectify a fault yourself or a repair is necessary:
– Turn the programme selector to
OFF
.
– Remove the appliance plug from the socket.
– Call the after-sales service -> see the after-sales service directory.
