Worktop height ≥ 90 cm,
variable position of the fan module
–
Saw out
the base plate in the built-in cabinet for
the fan module.
–
Place
the fan module in the base cabinet.
Refer to the operating instructions of the fan
module for details of how to install it.
– Using a flexible aluminium pipe (DN 125),
connect
the pipe connection piece to the fan
module.
– Now
lower
the hob ventilator into the worktop.
Make sure that the engaging lugs on the
appliance lie exactly on the clamping springs.
Press the appliance firmly into the worktop.
The engaging lugs on the appliance “snap" into
the clamping springs.
– At the front,
fix
the hob clamping element onto
the worktop from below until the appliance is
pressed on evenly (Fig. 11). If the worktop is
less than 36 mm thick, place the hob clamping
element under it.
–
Cut off
protruding sealing tape.
13
Fig. 11
min.
600
min. 900
min.
900
490
50
156
245
500
min.
560
872
195
365
Fig. 9
min.
600
min.
900
min.
900
AR 0
30-12
5
GB
031
min.
560
Fig. 10
