Gaggenau VI 492, Инструкция по эксплуатации

Страница: 10 / 32

10
Control knob
You can use the control knobs to select the heat setting,
the PowerBoost function, the FlexZone and the wok
function.
The control knobs have an illuminated ring with an
illuminated symbol for each function. The illuminated
ring changes colour when particular functions or
processes are activated.
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that the hotplate is still hot. Do not touch
the hotplate while the residual heat indicator is still lit or
immediately after it goes out.
The following will be shown depending on the amount of
residual heat:
▯
•
: High temperature
▯
œ
: Low temperature
and the illuminated ring around the control knob will
flash.
If the cookware is removed from the hotplate while
cooking is in progress, the heat setting indicator will
flash and the control knob will be lit orange.
Turn the control knob to position 0.
If the hotplate is switched off, the residual heat
indicator will be lit and the illuminated ring around the
control knob will flash. Even after the hob has been
switched off, the residual heat indicator will remain lit as
long as the hotplate is still warm.
Special accessories
You can purchase the following accessories from your
specialist retailer:
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
1 Lowest heat setting
12 Highest heat setting
Ž
PowerBoost function
ª
FlexZone activated
¹
Wok function
Hotplates
Û
/
$
Single-ring
hotplate Use cookware that is a suitable size.
ò
Three-ring
hotplate This hotplate switches on automati-
cally when you use cookware with a
base that corresponds to the size of
the outer zone (
ð
or
ò
).
á
FlexZone See the section entitled
Only use cookware that is suitable for use with induction
hobs – see section entitled
~
"Cooking with induction"
WP 400 001 Wok pan
WZ 400 001 Wok pan support
VA 420 000 Connection strip for combination with
other Vario 400 appliances for flush
installation
VA 420 001 Connection strip for combination with
other Vario 400 appliances for flush
installation with appliance cover/
extension
VA 420 010 Connection strip for combination with
other Vario 400 appliances for surface
installation
VA 420 011 Connection strip for combination with
other Vario 400 appliances for surface
installation with appliance cover/
extension
VA 440 010 Stainless steel appliance cover