background image

8

en

       Causes of damage

Some induction cookware does not have a fully 
ferromagnetic base:

If the base of the cookware is only partially 
ferromagnetic, only the area that is ferromagnetic 
will heat up. This may mean that heat will not be 
distributed evenly. The non-ferromagnetic area may 
not heat up to a sufficient temperature for cooking.

The ferromagnetic area will also be reduced if the 
material from which the base of the cookware is 
made contains aluminium, for example. This may 
mean that the cookware will not become sufficiently 
hot or even that it will not be detected.

Unsuitable pans

Never use diffuser hobs or pans made from:

common thin steel

glass

earthenware

copper

aluminium

Properties of the base of the cookware

The material(s) from which the base of the cookware is 
made can affect the cooking result. Using pots and pans 
made from materials that distribute heat evenly through 
them, such as stainless-steel pans with a three-layer 
base, saves time and energy.

Use cookware with a flat base; if the base of the 
cookware is uneven, this may impair the heat supply.

No cookware on hotplate/cookware of an unsuitable 
size

If no cookware is placed on the selected hotplate, if the 
cookware is made of an unsuitable material or if it is not 
the right size for the hotplate, the hotplate indicator will 
start to flash. To stop the indicator flashing, place 
suitable cookware on the hotplate. If it is left flashing for 
more than 9 minutes, the hotplate will automatically 
switch off.

Empty pans or those with a thin base

Do not heat empty pans, nor use pans with a thin base. 
The hob is equipped with an internal safety system. 
However, an empty pan may heat up so quickly that the 
"automatic switch off" function may not have time to 
react and the pan may reach very high temperatures. 
The base of the pan could melt and damage the glass on 
the hob. In this case, do not touch the pan and switch 
the hotplate off. If it fails to work after it has cooled 
down, please contact the Technical Assistance Service.

Pan detection

Each hotplate has a lower limit for pan detection. This 
depends on the diameter of the ferromagnetic area of 
the cookware and the material from which its base is 
made. For this reason, you should always use the 
hotplate that best matches the diameter of the base of 
the pan.

Содержание VI 462





























Отзывы: