Gaggenau VI 424 610, Инструкция по использованию и уходу

Страница: 11 / 56

11
Residual heat display
The residual heat display indicates that a cooking
zone is still hot.
Don't touch the cooking zone as long as the light ring
around the control knob is still blinking, even if the
cooking zone is already turned off.
Cooking zones
Special accessories
You can order the following accessories from your
specialist retailer:
Use the accessories only as indicated. The
manufacturer assumes no liability for incorrect usage
of the accessories.
Setting the cooktop
In this chapter you will learn how to adjust the cooking
zones. In the setting chart you will find heat levels and
cooking times for various dishes.
Setting heat level
1 Push in control knob and turn to the desired heat
level (1-12 and booster function). The
corresponding cooktop display on the cooking
zone blinks.
2 Place appropriate cookware on top within 90
seconds.
If no pot is detected, the cooking zone is
automatically turned off again. To reactivate the
cooking zone, turn the control knob to 0 and reset
the heat level.
3 When the cooking zone is heating up, the
cooktop display and the light ring behind the
control knob are lit up continuously.
Turning off appliance
To turn off the cooktop, turn all control knobs to the
0
position
The residual heat display in the control knob ring of a
cooking zone that's too hot blinks slowly until the
cooking zone has cooled down.
$
Simple cooking zone
Always use cookware of appropriate size
Only use cookware suitable for induction cooking; see sec-
tion "Cooking with induction - cookware"
VA 440 010 Stainless steel appliance cover
VA 420 000 Connection strip for combination with
other Vario appliances in the 400 series
for flush installation
VA 420 001 Connection strip for combination with
other Vario appliances in the 400 series
for flush installation with appliance
cover/compensation strip
VA 420 010 Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation
VA 420 011 Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation with
appliance cover/compensation strip
VA 450 400 Appliance extension 15” (38 cm)