Gaggenau VI 411, Инструкция по эксплуатации и сборке

Страница: 17 / 20

Installing the control panel
• Before installation, remove all styrofoam
packaging from the control knob and peel off
the protective film behind the luminous disc.
• Open the lid of the connecting terminal on the
control panel. Secure the mains connecting lead
as shown in the connection diagram. Secure the
connecting lead with the pull relief. The mains
connecting cable must at least correspond to the
type H 05 VV-F (3 x 1.5 mm
2 ). Close the lid of the
connecting terminal.
• Hold the support plate from the rear against the
cabinet front, insert control knob into the hole,
secure from the rear with the nut. Secure the
support plate additionally with the supplied wood
screw to prevent turning.
• Secure the control panel with the included nuts
onto the support plate.
15
Note:
only install control panel with appliance of the
corresponding type.
Before connecting the appliance, make sure
the electricity is switched off at fuse point!