Gaggenau VG491211CA, Руководство по установке

Страница: 16 / 52

16
en-us
Conversion to another type of gas
4.
Turn the control knob clockwise to position 1 (F) .
5.
Turn the control knob counterclockwise to position 0
(G) . Wait until the illuminated ring turns yellow (H) .
6.
Set the gas type on the control knob (I) , the currently
selected position will turn green:
7.
Keep the control knob at the desired setting for at
least 5 seconds. The illuminated ring around the
control knob will turn green
(I) .
8.
To save the setting, it is necessary to exit the menu as
follows:
Turn the control knob to position 0 (J) . Then
turn the control knob counterclockwise to position 12
(K) .
Turn the control knob clockwise to position 1 (L) . Turn
the control knob counterclockwise to position 0 (M) .
Wait until the illuminated ring goes out (N) .
The setting is saved. The illuminated ring around the
control knob will turn yellow for a second. Wait until the
illuminated ring goes out.
Checking functions after the conversion:
The flames are adjusted correctly if no yellow tips are
visible. They must not go out when switching over swiftly
from the high to the low setting.
Note: Stick the adhesive label included with the nozzle
set over the rating plate of the appliance to document the
changeover to a different gas type.
Control knob position Gas Type
7 NG A 6" WC
9 Propane 10" WC
)
(
)
* +
3URSDQH:&
1*$:&
V
,
. -
1
0 /