background image

9

 Operating the appliance      

en

Switching on

Your gas hob has an automatic quick-ignition function.

1

Place a suitable item of cookware on the pan 
support.

2

Push in the control knob for your chosen burner 
and turn it clockwise or anti-clockwise to the heat 
setting you require. 
The burner ignites automatically.

Turn the control knob to set the heat setting.

m

Warning – Risk of deflagration! 

If the burner does not ignite after 15  seconds, switch off 
the control knob and open the door or window in the 
room. Wait at least 1 minute before igniting the burner 
again.

Simmer setting

With the simmer setting, the burner switches the gas 
flame on and off. This allows you to melt chocolate or 
heat up delicate sauces, for example.

Turn the control knob to 

Â

. It takes 10 - 50 seconds to 

switch on or off.

Electronic flame monitoring and 
automatic re-ignition

For your safety, the hob has an electronic flame 
monitoring system. If the flame goes out while the hob is 
in use (e.g. due to a draught), the appliance will 
automatically re-ignite the burner.

If re-ignition is unsuccessful (e.g. because liquid or food 
has boiled over and remains on the burner), the 
appliance will switch off the gas supply.The illuminated 
ring behind the control knob will flash.

Turn the control knob to 0. Wait until the appliance is 
cool enough and then check whether all the burner 
parts are in the correct position. Check whether the 
burner or the ignition plug are covered in food remnants 
etc.

~

 "Trouble shooting" on page 13

Switching off

Turn the control knob to position 0. The appliance 
electronics will shut off the gas supply.

m

Warning – Risk of burns! 

When the appliance cover is closed, heat will 
accumulate. Only close the appliance cover when the 
appliance has cooled down. Never switch the appliance 
on with the appliance cover closed. Do not rest food on 
the appliance cover or use it to keep food warm.

Residual heat indicator

The luminous disc behind the control knob flashes after 
switching off, to indicate that the appliance has still not 
cooled down to such an extent that it can be touched 
safely.

Safety shut-off

For your safety, the appliance has a safety shut-off 
function.The appliance is automatically switched off if it 
has been in operation for an extended period. How long 
the appliance waits before switching itself off depends 
on the setting (setting 12 = 1 hour, setting 1 = 4 hours). 
The illuminated ring behind the control knob will flash 
orange and white alternately.

Turn the control knob to 0. You will now be able to start 
the appliance again as usual.

Содержание VG 425 211 AU

















Отзывы: