Gaggenau VG 231 220 CA, Руководство по установке

Страница: 13 / 52

13
Conversion to another type of gas
en-us
Replacing the main control nozzles:
1.
Remove the pan support and all burner parts.
2.
Undo the cooktop fastening screws on the burner (two
screws) and carefully lift the cooktop up and off.
3.
Remove the control knob.
4.
Undo the fastening screws on the control panel.
Remove the control panel and disconnect the
connection cable on the back of the control panel.
5.
Remove the securing clips from the burner pipes. Pull
out the burner pipes. Unscrew the screw on the air
regulating sleeve. Remove the nozzle retaining head.
6.
Pull off the nozzle and O-ring for the inner burner ring
by hand. Unscrew the nozzle for the outer burner ring
(WAF 10).
7.
Check that the O-ring is seated correctly in the new
main nozzle for the burner inner ring. Fit the nozzle
onto the burner pipe. Screw the new main nozzle for
the outer burner ring as far as it will go into the nozzle
retaining head.
8.
Fit the nozzle retaining head and burner pipes. Fit the
securing clips.
9.
Loosen the screw and then adjust the air regulating
sleeve to the correct setting (see nozzle table).
Retighten the screw.