background image

3

For your safety

Do not operate the appliance if it is damaged.

The appliance must only be connected by 
an authorised specialist, paying attention to 
the relevant regulations of the power supply
companies and the regional construction
regulations. 
Observe the assembly instructions! 

The appliance could be damaged if connected
wrongly!

When connecting electrical appliances in the
proximity of the cooktop, make sure that connecting
cables do not come into contact with hot cooking
surfaces.

Only ever operate the appliance under supervision.
Observe caution with oils and fats. Overheated oils
and fats can easily cause fires.

Caution:

the appliance heats up during operation.

Keep children away.

Do not operate the cooking positions without pots
and pans placed on them. 

To avoid jeopardising the electrical safety of the
appliance, do not use high-pressure or steam jet
cleaning devices.

Do not store any substances that are sensitive to
high temperatures, or which pose a fire hazard 
(e.g. cleaning agents or spray cans), in drawers or
cupboards under the appliance.

Operation of the appliance must be discontinued
immediately if improper use produces cracks,
breaks or flaws on the cooking surface, with the
result that live parts can come into contact directly
or indirectly with seeping liquid or if there is a risk
of injury. Remove the mains plug or switch off the
corresponding mains fuse. Call after-sales service!

Isolate the appliance from the mains during every
maintenance operation. To do this, remove the
mains plug or switch off the corresponding fuse.

Repairs must be carried out by authorised
specialists, thus ensuring electrical safety.

As the user, you are responsible for maintenance
and proper use in the household. No warranty
claims can be lodged for any damage resulting
from failure to observe these instructions.

Note:

if you have fitted the appliance cover VD 400-000
(special accessory) on the appliance, it must not 
be closed until the appliance has cooled down
completely. Do not operate the appliance with the
cover closed! Heat development may damage the
appliance and the cover. Do not use the appliance
cover as a surface for placing objects or for
keeping things warm.

Subject to technical change without notice.

1. Important Notes

Содержание VC 421





















Отзывы: