Gaggenau Vario RC289370, Инструкция по применению, Страница: 41 / 56

operation
en
41
Bottle shelf
Store bottles securely on the bottle
shelf.
→
Fig.
4
Tip:
You can use up to five bottle
shelves on an extendable shelf.
operation
7 Basic operation
operation
7.1 Switching on the appli-
ance
1.
Press .
a
The appliance begins to cool.
2.
Set the required temperature.
→
Page 41
7.2 Operating tips
¡
Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the set temperature has
been reached.
¡
The housing to the left, the right
and beneath the cool-fresh com-
partment may heat up slightly tem-
porarily. This prevents condensa-
tion in the area of the door seal.
¡
When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
¡
The temperature in the appliance
varies due to the following condi-
tions:
– How often the appliance is
opened
– Load capacity
– Temperature of newly stored
food
– Ambient temperature
– Direct sunlight
7.3 Switching off the appli-
ance
▶
Press .
7.4 Setting the temperature
Setting the refrigerator
compartment temperature
▶
Press / repeatedly until the
temperature display shows the re-
quired temperature.
The recommended temperature in
the refrigerator compartment is
4 °C.
Setting the cool-fresh
compartment temperature
Note:
The standard setting of the
cool-fresh compartment is preset at
0. Setting 0 corresponds to a temper-
ature of around 0 °C. You can set
the temperature in the cool-fresh
compartment to 3 settings warmer or
colder.
Tip:
If frost forms on the food items
in the cool-fresh compartment, set a
higher cool-fresh compartment tem-
perature.
1.
Press and hold until the temper-
ature display flashes.
2.
Press / to change the setting.
– Setting –3 corresponds to the
coldest setting.
– S3 corresponds to the
warmest setting.
a The selected setting is saved after
one minute.